Custom Fabrication
2 Main Reasons for Marble Steps Replacement
1. A crack or step with a large chip, has to be replaced as fast as possible. It’s become very dangerous to have such a piece. Tenants can get a serious injury as usually it’s weak and loose. Urgently after a damage more...
Marble and Granite Seams or Joints Repair
How the seam on stone countertops should look like? What are the right seam width and color should be when joining stone slabs? What does the seam visibility depend on? If we consider countertop fabrication from even more...
What is needed to custom marble fabrication?
Any stone is needed three basic tools to perform fabrication: Saws There are different saws to serve different functions during the fabrication process. – Block saws cut the block into smaller and more customized more...
Stone Chips, Gouges, and Pits Repair Service
Get Rid of Marble Chips Once and For All. Marble is a quite soft and brittle material and it is not required significant force to deform it. Most damages can be in the form of cracks, chips, stains, and etches, which more...
Frequently Asked Questions about Marble Restoration
Q: How to avoid permanent stains? A: You can avoid these by wiping the surface, just immediately after it gets a spill, or you can guard the marble upfront, using a layer of marble sealant. You should reapply the more...
Clock Marble Base Ready to be Installed
As you can see after the cutting, shaping and polishing has been completed, the piece is now ready, meaning that it can be installed. Our designs will surely help to add a new level of aesthetic to your home that you more...
Custom Molding Fabrication. Botticino Marble
This part of the elevator door frame was missed in the building, we made the new refitted section of molding fabrication. more...
Custom Insert into Counter Edge after Fabrication & Installation
First, we made the template, then cut out the insert from other White Carrara piece, and then install it into the hole on the counter edge. Made it much less obtrusive. more...
Countertop Custom Insert Fabrication & Installation
When restoring marble such operations as grinding, polishing, sawing, drilling, cutting, carving, gluing, sealing, glazing, refitting and others can be used and their combinations. more...
Botticino Marble Raw Piece Trimming
We picked the original botticino leftover from the work side, and then cut and refit to desirable form. more...
Travertine Table Outdoor Fabrication
Travertine is characterized by a porous like sponge structure, a small hardness (does not leave a scratch on glass), light color (white, grayish, yellowish, brown). The porosity of travertine is due to bubbles of more...
Broken Marble Base on Bronze Table Clock
This bronze table clock have been picked up from client. Since the second part was lost, we found the same kind of marble, and based on the sample we found the same stone for fabrication. more...
Stone Cutting & Custom Fabrication Service
We are able to fabricate or modify an existing piece of marble or granite, according to customer specifications. The fabrication can be done: Outdoor On construction site Indoor (on-premises). The fabrication or more...
Travertine Round Coffee Table Fabricated
Nowadays often there is used in production a marble with a very complex structure, like travertine, or it is not at all clear what kind of marble with a variety of hardness, density and with numerous pores and veins. more...
Crystallic Marble Steps Rare 1-3/4″ Thickness New Installation
The original old steps had rare 1-3/4″ thickness, so in order to replace steps with the same thickness we spent great deal of time to find such “irregular” slabs to order the new steps fabrication. more...
Questions and Answers about Estimating
Do you provide a free estimate? Yes, for a free estimate please email us a picture/s, your zip, and other details. Do you provide a free visit for onsite review and estimate? Yes, we can visit you for a free onsite more...
Elliptical Table on Construction Site Fabrication
The old round table was cut to the elliptical shape and fabricated on the construction site (attached to the customer’s building). The polyester coat was sanded out and delaminated, two sides trimmed and rounded, more...
Clock Marble Base Cutting and Shaping
Our marble piece cutting and shaping includes processes that will create customized shapes to accommodate almost any type of needs that you might have in your home. Whether you need to re-shape a brand new marble top more...
Round Dining Table before Cutting and Fabricating
The round Botticino dining table coated with Transparent Polyester Glazed Coat, glass-like finish. Marked for trimming, cutting, edging to bullnose, coat stripping and fabrication to specified dimensions and more...