Marble Restoration & Stone Care Service

Keep in mind that marble is porous and susceptible to stains, making it a fast absorber of colored spills, smears, which may add unsightly undesired marks on the surface. more...

Spills and drops from coffee, tea, wine can leave ugly undesired marks. To avoid this, immediately wipe the stain with a damp cloth and then apply to the remaining stain with a special “Mangiamacchia – Spot more...

To achieve the ideal floor, it is necessary to grind it with subsequent polishing. This type of work will give your floor a qualitatively different appearance, not only from aesthetic but also from a practical point of more...

Sealers are products that saturate and penetrate into pores of statuary marble and clog its pores, thus reducing the natural absorbency of most stains. more...

The proper sink installation should include the holes drilling, brackets mounting and sink rim water seal with silicone. The proper amount of holes and brackets should permanently withhold a sink full of water or any more...

Entryway marble floors are most often subjected to restoration because due to deterioration such as sand grain abrasive effects in mud, the floors are usually opaque, severely scratched and worn out. It happens when more...

Cloudy opaque spots on marble are actually etched, no stains, the salts, and minerals in tap water react on the surface, leaving such etch marks. more...

Black marble credenza top with a white pattern and beveled edge. Broken onto 3 big chunks. more...

Drawer/credenza black marble top was broken in a few parts, then fixed with 2 components epoxy and polished. more...

We didn’t do the poorly filled seam repair, our goal on that project was surface refinishing, removing all cloudiness and dull spots. more...

The poorly filled seam expansion may occur when new kitchen cabinets setting down under the weight of counters, building shifting, inaccurate templating or installation. more...

The dining table damages were fixed first, then recoated with crystal clear epoxy resin. more...

Natural marble is the shiny and appealing stone found on vanities, countertops, bathtubs, tables tops, etc. When this marble gets scratches or gashes, it can appear very dull, and not reflect as it should. This tends more...

Often to restore window sill, it is necessary to dismantle the stone. Today, we can restore your window sill right on-premises. The price for the restoration will be accordingly cheaper, since dismounting and more...

Chipped nosing step in Junior’s restaurant. More likely happened by hitting of shoe hill. Times Square in Manhattan. more...

Chips on nosing were fixed with tinted epoxy and setting back broken off pieces. Restaurant on Times Square in Manhattan. more...

The Orion condominium at 350 west 42nd street The marble was crumbled and deteriorated in some areas to sand-like condition. It’s happened due to the nature of this kind of limestone and continuous contact more...

Onyx is one of the easiest marble for color matching. It has natural yellow/brown colors that are matching to most general epoxies. It can be easily blended among natural colors and patterns. more...

The table has a clear coat on the edge, we fixed the ding without coat restoration. more...

The cabinets and marble top were trimmed and cut off. Our work was to cut the stip from marble leftovers and use this piece to fit and build a double edge on the newly cut edge. more...

Mosaic tiles are a combination of pieces of the same shape and size, glued to its base, which creates a single composition. The base can be a mesh or paper. The material is various, it can be glass, stone, plastic, more...

Deep gouges, crumbling or potholes in a tile caused by moving furniture or by hitting other heavy objects can be not easy to repair and depending on its size and depth. Deep gouges or chips (that is 1/8″ or more...

The counter had not properly propped cabinets under the corner, due to its weight the counter eventually starts to moving down and buckling, detaching seams and cracking sink cutout. more...

The floor was severely burned and discolored with caustic harsh cleaner. We have revived the shine and the color with polishing and sealing. more...

This picture shows stains on Botticino tiles in the bathroom before leaching, cleaning, honing and re-grouting. Grime grout lines were scrubbed out to be ready for new grout apply. Dirty grout before re-grouting. more...

This disrepair marble bar top is located in a nightclub in Chinatown New York, NY. As you can see in the picture the bar was heavily used, as I guess with a lot of spills of various drinks on daily/nightly basis more...

To make a good cleaning on honed marble we are using a heavy duty alkaline cleaner and coarse buffing pads with handheld polished or a floor machine. more...

This floor in the medical office was sanded down to the flat surface, honed, tinged and saturated with color enhancement remediation. more...

Dining table disruption restoration. The image of breakage after the repair. Pre-colored epoxy (travertine filler) was used. more...

The repair of marble steps in a building also implies compliance with certain technical features of the repair. This is necessary not only for the fact that brand new steps in public buildings would last longer but for more...

The disrupted panel was restored in the basement of the building. Pick up and delivery was nor required. more...

The statue base was completely refurbished and tinged. Chips, scratches, discolored spots were removed. We reattach parts to improve adhesion strength. We pick it up from the client to fix it on our site. more...

A marble floor suffers from women heel pins, furniture legs, sand, which falls from shoe soles. And if a heavy object falls on the marble, it is possible to form a chip or pothole. All these consequences can be removed more...

Diamond-shaped terracotta mosaic tile on the kitchen floor is sealed/saturated by color enhancement sealer on the half area. You can notice color tinge and enrichment at the forefront of the floor. more...

The new steps were successively installed on stout SpeedSet White Fortified Thin-Set Mortar. It’s the time-critical installation, so it will be ready for light traffic in 6 hours. Located in Borough more...

We restore this tub top by deep grinding, erosion holes patching, epoxy excess removal, polishing, sealing and caulking. more...

Clean the sides of the toilet base from traces of dirt, old grout or caulk. After this, carefully dry them with torch or fan, as well as the adjacent floor. The further processed joint must be degreased with acetone or more...

The bathtub top was re polished, erosion removed, re caulked and sealed. Some deep holes/erosions on surface were cleaned and patched by epoxy. more...

Marble on a kitchen usually spoiled with organic substances, like grease and oil. Over time such substances can accumulate more dirt and embed into marble topical veins, pores and holes. more...

The blotchy stains were topical and easy to removie with top layer of marble. Sometimes light countertops begin to acquire a yellowish shade. To remove such film, try to apply on a surface and leave for a short time a more...

Marble tabletops are subject to easy etching, stains, and nocks, from the daily kitchen affairs. This entails very easy for the marble to lose its luster and taking the whole kitchen down with it. more...

This new table is purchased at a discounted price. The seller instead of the replacement offers money to compensate for the restoration work. There are obvious signs or previous attempts to restore some unknown more...

The yellow smears were removed with various chemicals without affecting or discoloring an original finish on the concrete floor. Removed within one day without poulticing. Located in West Village New York, NY. more...

The concrete floor got some yellow stains from unknown source. The challenge was to remove the stain only, without affecting the original concrete coat. Located in art gallery in West Village New York, NY. more...

For the chromed faucets and white tiles would match the best a white or clear caulk. Nowadays there are many colors of caulk available, and in most cases for different colors can be found the appropriate caulk. As a more...

Picture of the buckling landing marble slab after cracks repair and propped from underneath side. more...

Here you need to restore most marble characteristics to the original while retaining maximum elements of the product. This is a task for professionals, since considerable practical skills, sophisticated equipment, and more...

The big rectangular dining table had a transparent polyester resin/glaze coat on it. We fixed it without recoating the entire table. First, we restore the marble cracks then the glaze coat itself. It’s all more...

The step was severely chipped by moving company, and could not be properly restored due its size and location, so we suggested to replace the step instead of repair. A patched chip would not last and would happen more...

This 4′ x 4′  old landing step was severely damaged due to age and regular traffic. This repair includes: spider net cracks repair chips repair surface polishing nosing cutting & reshaping. more...

When the sandstone tiles are well saturated with a sealer this protects them from absorbing stains, muddy stuff and becoming etched by absorbing chemical spills like road salt. more...

Painted, dingy and dirty stairwell/flight leads to the building’s roof. Will be demolished and replaced on the same day. more...

The terrazzo staircase was operated for several years in a sparing mode, but still lost its shine and was required in partial cleaning and restoration. Preliminary preparation includes pasting walls with a protective more...

Old steps were removed and new White Carrara steps installed. To adhere the steps we used a white caulk, it makes good appearance and some flexibility and durability. more...

If you have a limestone shower, wipe surfaces with a rubber squeegee after each shower-taking so that dull soapy marks and grime are not deposited to marble and grout. Try to wipe the shower daily. Marble is more...

The Orion condominium at 350 west 42nd street This lip all around the tub was affected by erosive wear, which happened after constant and continuous contact with water during normal use. more...

Outdoor travertine tiles spotted by touching, scuffing, exposing to the natural elements and the street dirt. Before reviving. more...

In fact, the shower walls polishing procedure is the same as on large floor spaces. The difference is only in the equipment used. The only point about which you should not forget is that the restoration of the walls more...

We use the best sealers to give marble floors the maximum protection and an elegant and consistent appearance. more...

Over time polished terrazzo can start to show signs of wear from people traffic. It is happening not by the shoes itself, but sand and salt that as abrasive as sandpaper, it will slowly sanding away the shiny finish of more...

Cracked botticino border panels next to building elevator door. more...

The long throughout offshoot crevice on Crema Marfil marble banjo vanity top happened by metal bar rusting and expanding asides. more...

Dinning table, botticino slab 3/4 inch thickness. Was accidentally broken on several fragments. Located in Bronx NY. more...

This crack is a result of moisture absorbed into the marble, rusting and expanding in volume metal rod. Was fixed with 2 component flowing super adhesive “Cremabond” and colored by Akemi coloring more...

The grout should be firmly spread over the surface and pushed into the full depth of the channels between the tiles. Then wiped and the residue removed. more...

You can see as far as this table-top is broken into many small pieces at all. Edges of pieces are very uneven, sharp and strongly curved. The table-top is very heavy. more...

Shower Rojo Alicante tiles were cleaned with aggressive general cleaner. Shine and original colors were destroyed to the lifeless pale finish. more...

The picture shows the tiled marble floor in the bathroom before restoration. Shabby tiles and door saddle shows many signs of wear, scratches, uneven reflections, dull tiles, etc. more...

This mid-size round table was picked up from the client’s address and restored on our side as it would generate a lot of dust and mess on the client’s premises. more...

The grinding process (make hone finish) is part of a floor polishing process, it can also be the stand-alone process in order to make the floor leveling, to get rid of superficial cracks, scratches, and dull spots. The more...