Marble Restoration & Stone Care Service

more...

more...

more...

The good news is that a broken marble slab does not mean that it has to be put down in and trashed, if the break isn’t too severe, it can be mended and used as brand new table. more...

Hued square coffee table top slab after broken off corner repair. Various colors, patterns, and veins allowed us to hide crack lines to invisible. more...

After the process of honing and grouting, your bathroom floor should have undergone several changes in appearance and condition. Here’s what you can expect: 1. Smoother Surface: Honing is a process that involves more...

This fine statue of a woman is a symbol of a woman’s beauty. It personifies tenderness in a bend of forms. Unfortunately, it was unintentionally dropped, and the basis has been given a strong and crooked more...

If you need to update small items – figurines, busts, statues, then first they are processed with fine sandpaper and then polishing or buffing. In the event that the surface forms chips, scabs, or large cracks, then more...

Captured in this image is the restored statue base supporting a Apollo Belvedere Bust Head, Greek Roman God. The intricate repair work has seamlessly rejuvenated the base, restoring its structural integrity and more...

The tiles were cut to fit and replaced on the night shift in Junior’s restaurant in Times Square. more...

The panel from the lobby wall in the building in Flatbush, Brooklyn, NY, fell down from the wall and, disrupted into many small pieces. more...

Marble sculpture sealing with protective agents is recommended once a year or two, but it all depends on the degree of stress on it. Basically, silicone-based sealers are used for saturation, they protect the stone more...

The crack on the travertine table-top is repaired by two-component glue, matched to the color of the stone. Further, the top was polished with sandpaper and the latest grits finishing diamonds, and we began to prepare more...

In the case of the old floor, the seams between the tiles are knocked out and filled with dirt. There are different approaches to sealing joints. The easiest is to clean out seams and seal it with a regular grout. This more...

more...

The concrete is relatively soft material and can easily lose the shine, showing wear and tear signs which occurs as a result of normal wear and aging on counters. more...

It is important to understand, any sealers or cleaners for marble will not protect it from sand, dirt, grime, scratches, dingy spots and a doormat placed at the entrance will wipe off any dirt from the sole of the more...

A fresh sealant can be removed easily from most types of surfaces – just wash it off with warm water and soap. However, after drying, it may be a pretty tough task. Most often, various solvents can be used for more...

Some Stone Drilling Features.  Drilling speed. The stone does not love rushing. In order for a hole to have smooth edges, the drilling of the marble is performed at low speed, and at a variable speed. The number of more...

To get rid of dull areas and scratches on the surface, a grinding machine with grinding discs should be used. Grinding is performed using special abrasives, different for each type of stone, taking into account diamond more...

The caulk seam inset between a sink rim and counter can get smoother if you paste over it a masking tape, which is removed after caulk application. more...

As part of the countertop restoration service, a new white caulk was applied to the angle between the counter surface and the tiled backsplash. more...

This buckling dining oval table had an inner/hidden crack, which can be noticeable on surface reflection. Actually, the table was already cracked but held by supporting plate/disc from underneath the table. more...

Sometimes instead of a caulk, for the best color matching, we can use colored epoxy. This little tricky process and can be used on items with minimum movements, otherwise, the epoxy will be cracked. more...

First of all, due to the fact that marble availability can be found at every step: marble floors at metro stations, in restaurants, museums, cultural centers, historic buildings, and modern buildings. Natural marble more...

Broken corner and edges of dining table. Image before revamping. more...

Picture of the de-stained fireplace where oily stains were removed from under the top shelf stab. more...

Sometimes marble or granite becomes cracked, chipped, or broken over time, by accident, improper installation, or floor/building shifting. It can be a tile that needs to be replaced or a counter that needs to be more...

The white grout was cleaned with heavy-duty alkaline cleaner diluted with water, sponge, and brushes, and then sealed. more...

Because the table wasn’t attached to the leg properly, once it fell on the floor and broke. So after restoring the tabletop, we mounted it to the leg with screws and nuts. more...

more...

To repair and hide the crack lines to unnoticeable – the multi-colored epoxy was used. more...

While removing the old caulk we pay high attention to avoid scratching the glass tiles, as the glass is not a fixable and not well polishable material. more...

Polished and color-enriched the slatestone jamb on the old fireplace. There are crafted curves on the surface that were treated as well. All restoration is done in a living brownstone house in Brooklyn NY. more...

We’ve removed some old epoxy from the top of the seam, then cleaned up the gap with acetone, and filled in with new epoxy. more...

Sometimes the light marble countertops begin to acquire an undesired yellowish shade from spills or kitchen appliances. To remove yellowing spotting, try to apply on a stone surface and leave for a few hours a more...

more...

The wax finish was stripped from the surface, cleaned, and buffed. The polish or shine finish is not from the application of a product on the surface. This can be confusing when some “topical” products are more...

In most crack repair projects color matching and closest fitting are critical for the crack’s visibility and strength. For some kinds of marble, a color can be easily matched, for some others not so easy or not more...

Before installing the door saddle you’ll need to make sure that the floor beneath is thoroughly cleaned and dried. Marble is a soft material and can be susceptible to cracking if not installed on a level surface. more...

Granite crevice repair is quite a demanded service, which we are performing constantly. As a rule, at most, this applies to granite tiles and granite countertops. Of course, granite crevice reparation should be more...

This beautiful Calacatta Gold marble countertop was polished, buffed, and sealed. more...

In the picture is the rectangular floor hearth that was broken, burned, scratched, and chipped in many places. Picture before restoration. more...

We polish marble floors not only right after laying and installing marble slabs but also after using marble floors for a few years later. Our task is not only to restore the original shine of marble floors but also not more...

Eventually, we found out that only a bleach poultice could reduce the stains, so we applied the poultice to the floor and first row of wall tiles and left it for a few days. Then we did the standard restoration more...

more...

Corian, despite being a man-made stone material, can be damaged by acids. Acidic substances such as sour berries, fruits, and general detergents can cause etching or discoloration on Corian surfaces. It is important to more...

Marble protection implies the application of solvent or water-based sealers to marble surfaces – this is the final stage of chemical treatment. It will give restored surface water, oil, and grease repellent more...

Water spotting or etch rings on a countertop surface and waterfall edge. Marble, travertine, onyx, and limestone are all stones on a calcite basis, and therefore unstable to PH active liquids, especially acids. When more...

The glue is used by us also called two-component stone filler, the structure of the glue is quite dense, and with hardness almost like marble. Before the puttying of marble, the crack is carefully cleaned. If there is more...

Natural marble is a good absorbent, and any chemical substance you pour on it is going to determine its appearance. Do not use acidic or alkaline-based cleaners, even the baking soda tips found online, to clean marble. more...

more...

Installing a marble shelf on a kitchen backsplash requires careful planning and execution to ensure a secure and aesthetically pleasing result. Steps of the Marble Shelf Installation: Choose the Location: Determine more...

To drill holes for installing a marble shelf on brackets, you’ll need to follow a careful process to ensure the marble doesn’t scratch or break during drilling. Materials and Tools will be Needed: Marble more...

Botticino tub top after crack repair. The crack was filled with liquid-colored epoxy,  sanded with sandpaper to remove epoxy excess, polished, and then buffed. more...

The round Botticino dining table is coated with a Transparent Polyester Glazed Coat, a glass-like finish. Marked sides for trimming, cutting, edging to bullnose, coat stripping, and fabrication to specified dimensions more...

The marble is susceptible to undesired stains and possibly caused by various bathroom products such as hand soap, metal cans, hair dye, etc. more...

A shining finish on marble can be easily turn into discolored haze finish if cleaned by the wrong chemical. more...

Mold on a mosaic shower floor is a common issue due to the porous nature of grout and the frequent exposure to moisture. more...

To prevent future mold growth, consider applying a mold-resistant grout and sealer to the mosaic shower floor. Additionally, keep the bathroom well-ventilated, wipe down wet surfaces after each use, and regularly clean more...

more...

more...

more...

If a fragment is chipping off from a marble or granite, then it is better to save it and paste it back. After this, the parts adjacent to this fragment need to be re-polished. It is possible to imitate missed fragments more...

Marble crack restoration is a laborious process that requires an exceptionally professional approach. The essence of this work is to return to marble and surface its original and beautiful look. The main effort here is more...

more...

After all procedures with glue for the crack and sagging propping, all the restoration sites must be polished, so that the surface is perfectly even and smooth, and gluing places are not visible and cannot be felt on more...

Marble floors require regular renewal of protective coating, and if something is dropped (especially heavy objects), then repair. And now entertaining statistics. Did you know that the marble floor on which passed a more...

Vintage terracotta tile on the ground floor retouching. During the color enhancer sealer saturation and tinging. more...

This console type of vanity was broken by the previous tenant living in Manhattan and was sagging and held by the sink, otherwise, it would fall apart. more...