Porcelain Bathroom Floor Before Re Grouting
In the case of the old floor, the seams between the tiles are knocked out and filled with dirt. There are different approaches to sealing joints. The easiest is to clean out seams and seal it with a regular grout. This method is good because it is not necessary to expand seams well, and it does not matter on which glue the tiles are laid. The result is reliable and accurate.
Another way is to expand the seams and seal them with a two-component glue for further polishing the floor. The seams are smooth, polished and have translucent depth, like a stone. In this case, it is very important that tiles laying is done on a special, not dirty, glue and in the process of work the ideal cleanliness is observed.
In the case of the old floor, it is necessary to cut out seams with a rotary tool or blade, and in case of a new floor it is necessary to lay the tiles with cross spacers, or if the tiles are laid without seams, it is necessary to cut the seams with a disk and handheld grinder to allow glue to cling to seam’s walls.
Submit Your Order or Ask a Question :
You'll get a response within a few minutes or hours and usually not longer than 24 hours.