White Marble Countertop Etches Around Sink – Before Etch Removal
A white marble countertop around a stainless steel undermount sink, showing visible acid etches before treatment. The matte dull patches stand out against the otherwise polished surface, clustered around the sink edge where water and household liquids make contact most often.
The area by the sink is one of the most etch-prone spots on any marble countertop. Water itself does not etch marble, but the faucet area sees constant exposure to soap residue, toothpaste, lemon juice, vinegar-based cleaners and similar acidic substances. Each contact event burns a micro-layer off the surface, leaving a dull imprint that reflects light differently than the surrounding stone.
The etches visible here vary in size – some are small scattered marks, others cover a wider patch near the basin edge. Despite the damage, the marble slab itself is intact and structurally sound.

The go-to solution for this type of damage is etches removal combined with surface honing. The dull areas are brought back to a uniform matte or polished finish using diamond abrasives, matched to the original surface texture. When done correctly, the treated areas become indistinguishable from the rest of the slab.
Preventing future etching is a matter of avoiding acidic contact and sealing the stone periodically. Any spill should be blotted immediately rather than wiped across the surface to avoid spreading the acid further.
Submit Your Order or Ask a Question:
You'll get a response within a few minutes or hours and usually not longer than 24 hours.

























