Marble Restoration & Stone Care Service

Chip On White Table Edge. Color Matching

Matching the color of a chip on a marble coffee table edge can be done using several methods. Here are some steps you can follow:

1. Clean the chip and the surrounding area: Use acetone or spirit to clean the chip and the area around it. Make sure the surface is free of dirt, and debris to ensure proper adhesion.

2. Examine the chip: Look closely at the chip to determine its color, texture, and pattern. Note the shades of colors present in the chip, as well as any veining or patterns. This will help you select the appropriate pigment for color matching.

3. Prepair color matching materials: Depending on the size and depth of the chip, you may need different materials. Some options include:

– Marble dust or powder: You can purchase marble dust or powder from a local stone supplier or online. Choose a color that closely matches the chip.

– Epoxy resin or filler: Epoxy resins or fillers can be used to fill in deeper chips or cracks in marble. Choose an epoxy filler that is specifically designed for use with marble and is color-matched to your chip.

– Pigments or dyes: If you need to adjust the color of your repair material, you can use pigments or dyes that are specifically designed for use with marble. Choose pigments or dyes that closely match the color of your chip.

4. Mix the epoxy: Follow the manufacturer’s instructions for mixing. Use small amounts and gradually adjust the color until it closely matches the chip. It’s a good idea to test the color on a small inconspicuous area of the marble table or on a sample piece of marble before applying it to the chip.

5. Apply the epoxy: Using a razor blade or putty knife, carefully apply the epoxy to the chip. Smooth it out and remove any excess material using a razor. Allow the epoxy to cure according to the manufacturer’s recommendations.

6. Polish and blend: Once the epoxy has fully cured, use sandpaper to sand the repaired area. Blend the repaired area with the surrounding marble by gently sanding and buffing the surface until it looks seamless. Then buff it with marble polishing compound.

7. Clean and maintain: After completing the repair, clean the entire marble table surface and optionally apply a marble sealer to protect the repaired area and the rest of the table.

Note: Marble is a natural stone and may have variations in color, pattern, and texture. Achieving an exact color match may be challenging, but following these steps can help you get close to the original color. If you’re unsure about the color matching process, it’s recommended to seek professional help from a stone restoration specialist or a marble restoration professional to ensure the best results.

Submit Your Order or Ask a Question :

Footer Question: Email:  
Select Your Borough Manhattan NY Brooklyn NY Queens NY Bronx NY Staten Island NY Long Island NY Upstate NY New Jersey Other
Picture optional (up to 2MB):
File:

When to expect a response?
You'll get a response within a few minutes or hours and usually not longer than 24 hours.

Chip on Coated by Epoxy Onyx Table Edge Fixed Chip on Limestone Edge Chip Repair on Sink Edge Corian Chip on Sink Edge Repair Fixed Botticino Chip on Ogee Edge Chip Sanded Out from Man Made Counter Edge Crystalline Granite Counter Chip on Edge before Repair Chip on Corner of Ogee Edge. Botticino Vanity Chips Removed/Smoothed on Table Edge Chipped and Pitted Edge on Knoll Table White Marble Gouge On Table Edge Fixed Ding on Onyx Dining Table Edge Nocks on Knife Edge on Round Marble Table Saarinen White Thassos Oval Table. New Knife Edge Messed up Saarinen Dining Oval Table (Knife Edge Chips Trimming) Corian Chip Sanding and Smoothing Out Fixed Chip on Mitered Seam Chip Slicing Off from the Mitered Seam UbaTuba Granite Counter Unnoticeable Chip Chip on Black Granite With Gray Crystals Black Granite with Gray Crystals. Chip after Repair Counter-top Edge after Nick Repair Nocks on Rough Countertop Edge Countertop Chipped Edge Repair